DESCRIPTION OF BULLET MOLD.
The form and core pin are made of high quality duralumin alloy.
Pliers and sprue-knife made of stainless steel.
Handles of hard wood.
Bullet mold comes complete.
Weight without packaging 390 grams
Shipping Weight 460 grams
This mould produces quality Slugs that are designed for hunting large game,
with three cylindrical belts that create good a barrel centralisation and gas seal allows this to be used in a rifled or unrifled barrel.
They are a truly effective, expansive, segmented, slug, that causes maximum internal destruction on impact and minimum over-penetration meaning impressive stopping power.
After hitting your quarry, The slug breaks into multiple pieces providing a deep penetrating main body and 3 fragments that detach After contact and split from the main body (stopping anything )
It Can be loaded on a special wad or a Standard shotgun trap hull or with standard wad and gas seal.
which ever is use is fitted to the slug and remains attached after firing to give impressive stability during flight.Since the slug is lightweight, it can be used for practical shooting.
It is also possible to apply lubricant between the slug belts to reduce barrel slug friction, and even to powder coat them to get the perfect balance for your barrel.
SPECIFICATION:
12 gauge
1 Cavity Mold
Belt diameter 18,5mm (.728.)
Body 14,9mm (.551.)
Weight Without wad 30 grams (463gr) 1,06 ounce.
Weight Without wad 33 grams (509gr) 1,16 ounce.
(dependent on type / mix of lead)
Segmented and Expansive.